Tsurumi’s small dewatering pump, the LB sequence, is designed for purposes where area is tight, significantly building. Secured by เกจวัดแรงดัน1บาร์ or chain, an LB can be utilized in applications which involve slender pipes, small tanks, deep pits and in remote areas that are tough to reach with larger equipment. The LB model has a fully symmetrical design with no protruding components, permitting it to be lowered to unknown depths without any threat of snagging. With a diameter of solely 187 mm, the pump’s round cross-section even matches into smaller filter pipes. There is also a model with a water degree sensor which is just a few millimetres longer. The pump then controls itself automatically, switching on or off relying on the water stage. The LB presses water with filth particles up to 6 mm in size via the housing, allowing optimal cooling of the motor. The models in the collection pump 225–440 l/minute and to a maximum of 17.5 m. The smallest model weighs around 10 kg dry, the largest round 30 kg.
Share